Winter-Summer Universal Tent
Bereg Winter-summer tent is a three-person universal tent on a six-beam frame with a chimney opening, zippered bottom and one entrance.
Assembly takes up to 30 seconds!
Winter-summer consists of two water-resistant tent flies and a strong aluminum frame.
Outer tent fly. Material of manufacture is PU 4000 mmAq Oxford 300 fabric. Oxford has all the necessary qualities for the production of high-quality tents: wind, moisture, temperature resistance, durability. The fabric is easy to clean, does not absorb moisture, and is also UV-resistant.
The Winter-Summer tent fly is equipped with draw loops made of frost-resistant PVC and textile slings on the outside, so that the tent can be securely fixed on any surface.
All seams are sealed with sealing tape and provide reliable protection from precipitation.
Above the entrance, you can install a canopy which is provided by default.
The inner tent fly with a bottom is made in a combination of colors - white and reed green. White color is used for the production of the dome, reed green - for the lower part.
Both tent flies are attached to the frame with velcro, so a winter tent can easily be turned into a single-layer summer tent. The bottom is fully detachable.
The frame of the winter-summer six-beam tent. The dome shape provides streamlining and prevents snow accumulation on the roof. The main mechanism and other elements of the frame are made of high-strength B95T1 (in USA analogue AA7075, in EU ENAW 7075) aluminum alloy. The thickness of the bar used is 8 mm. Thanks to the umbrella mechanism, the tent is installed in a matter of minutes. This saves a large amount of time that can be spent on vacation.
4-season operation is achieved thanks to the possibility of installing a stove.
Equipment:
-
Removable zippered floor;
-
Zippered entrance with mosquito net;
-
Multifunctional window with transparent frost-resistant PVC insert;
-
2 organizers on a velcro fastener;
-
Velcro pocket;
-
Shelf-mesh under the dome;
-
Chimney opening;
-
Ventilation window at the bottom of the tent;
-
Protective skirt on the perimeter;
-
Loops on the outer tent fly.
PRECAUTIONS
-
Carefully secure the tent on the surface in strong gusts of wind to avoid overturning!
-
It is not recommended to use the stove and other heating devices in tents when the wind is more than 10 m/s!
-
Do not use flammable substances to ignite the stove!
-
It is FORBIDDEN to use gas, gas equipment, and liquid fuel devices for heating!
-
It is mandatory to use a smoke detecto when heating the tent. Check its performance regularly and change the batteries!
-
When installing and assembling, be careful when manipulating the elastic bars of the frame. Their sharp straightening can lead to injury!
-
Install the stove only in a specially equipped place. Before installing, spread a heat-resistant cloth carpet on the floor or ground!
-
Observe caution during sauna procedures. Do not touch the metal parts of the tent (frame bars, locks) to avoid burns. Pour water on the stove in small portions!
-
When using the stove, do not close all windows and entrances! Ensure that fresh air enters the room!
