Due to the special construction of the frame, the assembly time of the UP-2 Mini tent takes 1 minute!
The ability to quickly install a tent is very important if you are a fan of outdoor recreation in the autumn-winter period.
The material of the outer fly of the Up-2 Mini tent is made of waterproof PU 4000 mmAq Oxford 300 fabric, the inner one is PU 2000 mmAq Oxford 210. Between the two flies of the Up-2 Mini tent, an air gap is formed, which reduces the amount of natural condensate, effectively retaining heat in the winter tent.
The outer layer is connected to the frame with a reliable velcro made of frost-resistant PVC. Such velcros have a fairly wide size and are located in the places of bends, preventing the folding of arcs, as well as protecting the tent fly from mechanical damage.
The outer tent fly has a zipper for attaching a universal vestibule with dimensions of 2, 3 or 5 meters. The Bereg UP-2 Mini tent is compatible with all universal vestibules.
In the lower part of the tent, there is a protective skirt with loops for attaching stakes.
The loops of the UP-2 Mini outer tent fly are equipped with pockets, made with the use of reflective elements.
The inner tent fly of UP-2 Mini is attached to the frame using Velcro, so it is easy to remove it, and the tent itself can easily be turned into a lighter version of the summer residential module.
The standard equipment of the UP-2 Mini tent includes a floor that is fastened above the ground surface, which prevents the zipper from freezing in the cold and the ingress of moisture during rain. The floor is fully detachable.
In the autumn-winter period, we recommend using a insulated floor with a sandwich design made of foil and insulation. The insulated floor for UP-2 Mini completely isolates moisture, helps to preserve heat in the tent. There are two ways to lay the floor: spread it under the tent or put it inside.
Multifunction windows of UP-2 Mini tent consist of several layers: the protective valve with rigid supports on Velcro from the side of the outer tent fly, window filling of the transparent frost-resistent silicone film (temperature of use up to - 50°C), zippered outer tent fly, zippered mosquito net, and zippered inner layer.
The UP-2 Mini tent is 4-season, which allows using the residential module together with long-burning stoves. For maximum safety, the wall inside the tent (at the installation site) is additionally equipped with a removable heat-resistant fabric that can withstand temperatures up to 1200 degrees. Chimney opening in the roof of the Bereg UP-2 Mini tent is an insert made of the same heat-resistant fabric with a stainless-steel ring. This design eliminates the possibility of contact of the hot pipe with the tent material, increasing the fire safety of the UP-2 Mini. Thermal fabric with silicone impregnation is not affected by moisture and burning.
UP-2 Mini tent equipment
- One entrance with a zippered mosquito net and a swing door.
- Zipper over the entrance to fasten the vestibule for UP tents.
- Two five-layer windows (loopholes) with windproof and moisture-proof curtains, mosquito nets.
- Chimney opening, standard size: 90 mm (when ordering, free replacement of the ring diameter is possible).
- Three removable organizers.
- Shelf-mesh under the dome.
- Removable floor.
- Hinges for drying items or attaching a flashlight.
- Canopy installed above the entrance for comfortable use of the tent during precipitation. It is fastened with buttons and can be unfastened if necessary.
- Ventilation window for air supply.
UP-2 Mini scope of use
- Winter tent with stove
- Fishing tent
- Camping bath tent
- Summer camping tent
Carefully secure the tent on the surface in strong gusts of wind to avoid overturning!
It is not recommended to use the stove and other heating devices in tents when the wind is more than 10 m/s!
Do not use flammable substances to ignite the stove!
It is FORBIDDEN to use gas, gas equipment, and liquid fuel devices for heating!
It is mandatory to use a smoke detecto when heating the tent. Check its performance regularly and change the batteries!
When installing and assembling, be careful when manipulating the elastic bars of the frame. Their sharp straightening can lead to injury!
Install the stove only in a specially equipped place. Before installing, spread a heat-resistant cloth carpet on the floor or ground!
Observe caution during sauna procedures. Do not touch the metal parts of the tent (frame bars, locks) to avoid burns. Pour water on the stove in small portions!
When using the stove, do not close all windows and entrances! Ensure that fresh air enters the room!